Catalogue

Products

Conformal coatings, ESD packing and selective coating equipment: the full EMS Technologies range.

Conformal coatings and on-site coating job works.

ESD bags and moisture barrier bags (MBB).

White, pink and blue EPE foams, bins and thermoformed trays.

Send your drawing and quantity for a quote.

Conformal Coatings

ELPEGUARD® coatings that protect and insulate assembled PCBs for higher reliability and service life.

View →
ELPEGUARD conformal coating applied to an assembled printed circuit board, EMS Technologies India

Product

Conformal Coatings

A conformal coating is a thin polymer film applied over a populated board, following the contours of the PCB and its components. That film insulates the conductors and shields the assembly from moisture, dust, condensation, salt spray and chemical attack — the conditions that shorten the service life of electronics once they leave the factory. EMS supplies the complete ELPEGUARD® range as an India distributor for Lackwerke Peters.

  • Acrylic, polyurethane, silicone, thick-film and aqua systems
  • Matched to temperature range, chemical exposure and rework needs
  • Solvent-based and water-based chemistries for either line setup
  • UV tracer in the film so coverage can be verified under UV light
Enquire about this View full details →

Conformal Coating Job Works

On-site coating application, UV inspection, curing, thickness testing and rework.

View →
Automated conformal coating line running PCB assemblies during EMS Technologies on-site job work

Product

Conformal Coating Job Works

Rather than supplying the coating and leaving you to run it, EMS puts trained engineers on your line and takes the whole process: operating the coating machine, application, UV optical inspection, touch-up, drying and curing, thickness testing, removal, reworking and final inspection. The team is 30+ trained B.Tech engineers, all trained under Lackwerke Peters, working at client locations across India.

  • Brush, spray, dip and automatic selective application methods
  • UV optical inspection of every board, with touch-up and re-check
  • Cure schedules run to the Peters datasheet for the coating used
  • Thickness measured and recorded, with rework where needed
  • 30+ trained engineers deployed on site at your own line
Enquire about this View full details →

Selective Coating Machines

Automated selective conformal coating line equipment for precision and throughput.

View →
UV curing oven paired with a selective conformal coating machine supplied by EMS Technologies

Product

Selective Coating Machines

Selective coating puts conformal coating only where it is wanted, leaving connectors, test points and gold fingers clear. There is no masking and no de-masking, and no operator judgement about where the coating should stop, which removes the slowest and least repeatable part of the process once volumes go beyond a handful of boards. EMS supplies and supports the ALTD-450GS and ALTD-450U locally.

  • No masking or de-masking anywhere in the process
  • Industrial-computer control with on-line and off-line programming
  • Auto accuracy calibration and precision pressure regulation for clean edges
  • Integrated UV inspection so coverage is verified before a board leaves
  • ALTD-450GS coats panelised boards in one pass; ALTD-450U tilts 0–45° for no dead corners
Enquire about this View full details →

ESD Packing

In-house ESD packing solutions: bags, bins, foam and trays manufactured at our Hyderabad and Cochin plants.

View →
ESD thermoformed trays and anti-static packing manufactured in-house by EMS Technologies, Hyderabad

Product

ESD Packing

The complete ESD packing range, manufactured at our own plants in Hyderabad, Telangana and Cochin, Kerala since 2015: bags, bins, foam and thermoformed trays. Most of it is made to your component geometry rather than pulled off a shelf, so a drawing or a sample is usually the fastest way to start a quote.

  • Bags: bubble, static shielding, aluminium MBB, conductive grid and LDPE pink
  • EVA and PP corrugated bins for line-side storage and transport
  • EPE foam inserts and PET / HIPS thermoformed trays cut to your part
  • Made in-house at Hyderabad and Cochin, not imported and resold
Enquire about this View full details →

ESD Bags

Bubble, static-shielding, LDPE pink and conductive grid bags for safe electronics packing.

View →
Anti-static bubble bag protecting a printed circuit board, EMS Technologies ESD packing

Product

ESD Bags

A static discharge too small for a person to feel can still damage or quietly degrade a semiconductor. ESD packing bags are the first line of defence: they stop a charge building on the packaging surface and, in the shielding grades, stop an external discharge reaching the contents at all. We supply bags for bare boards, populated assemblies and loose components, in transit and in store.

  • Five types covering cushioning, shielding, moisture barrier and general packing
  • Plain or zip-lock grades for packs that are opened repeatedly
  • Heat-sealable, and supplied with desiccant for moisture-sensitive assemblies
  • Sizes made to suit the board or component being packed
Enquire about this View full details →

EVA Bins

Durable EVA bins for ESD-safe component storage and transport.

View →
ESD-safe EVA storage bin holding assembled PCBs, labelled for electrostatic-sensitive devices

Product

EVA Bins

EVA bins are reusable containers for moving and storing populated boards and loose components between processes. The bin body is anti-static, so parts are not left sitting against a surface that can hold a charge, and each bin carries the electrostatic-sensitive-device marking that tells anyone on the floor what is inside before they open it.

  • Built for repeated handling: stacking, line-side storage, transport
  • Anti-static body with ESD marking on every unit
  • Sizes and internal layouts matched to the components carried
  • Dividers and foam inserts where parts need to be held apart
Enquire about this View full details →

EPE Foams — White, Pink & Blue

Custom foam trays and inserts in white, pink and blue. Specify the required protection grade.

View →
Blue foam insert cut to component geometry, EMS Technologies

Product

EPE Foams — White, Pink & Blue

EPE foam trays and inserts are cut to the geometry of the component they carry, so each part sits in its own pocket instead of shifting against its neighbours. The foam absorbs shock and vibration in transit while dissipating static continuously, which matters for parts with exposed pins or connectors that bend easily and are sensitive to discharge.

  • Pockets routed to a drawing, so each part is located and held
  • Cushions against shock and vibration while dissipating static
  • Same tray works for handling, storage and operator presentation
  • Pocket layout, depth and footprint all worked to suit your part
Enquire about this View full details →

Moisture Barrier Bags (MBB)

Aluminium-laminated bags for moisture-sensitive electronics, storage and export packing.

View →
Silver aluminium moisture barrier bag for electronics packing, EMS Technologies

Product

Moisture Barrier Bags (MBB)

Aluminium bags — also called MBB, or moisture barrier bags — are the silver, aluminium-laminated grade. On top of the static-shielding Faraday cage they add a barrier against humidity, so moisture-sensitive assemblies stay dry as well as protected from discharge. They are the usual choice for long-term storage and export packing, heat-sealed with a desiccant inside.

  • Aluminium laminate barrier against humidity and moisture ingress
  • Static shielding as well, so no separate bag is needed
  • Heat-sealed, normally with a desiccant pack enclosed
  • The standard for long-term storage and export consignments
Enquire about this View full details →

ESD Thermoforming Trays

Custom thermoformed anti-static trays tailored to component geometry.

View →
Custom ESD thermoformed tray with cavities matched to component geometry, EMS Technologies

Product

ESD Thermoforming Trays

Thermoformed trays are vacuum-formed from sheet into a tooled shape, giving a rigid tray whose pockets match your component exactly. Compared with cut foam the pocket walls are thin and consistent, which suits automated line feeding, pick-and-place presentation and dense stacking where every millimetre of height matters.

  • Formed to your component drawing, not adapted from stock
  • Thin, consistent pocket walls for automated feeding and dense stacking
  • Clear PET keeps contents visible for inspection and counting
  • Black HIPS in conductive and anti-static grades for reusable protection
Enquire about this View full details →

Also available

ProtectA Pro: ESD Conductive & Anti-Static Paints

An advanced range of ESD conductive and anti-static paints for floors, walls, surfaces and polypropylene bins, built on a conductive polymer matrix for stable, durable electrostatic protection in industrial environments.

Datasheet (PDF)